top of page

Hammer Dulcimer Hardware

Tuning Pins/ Hitch Pins/ Acetal Rod
  • 1/8" diameter Acetal Rod (white or black) $1.25 per ft

  • 1 5/8" long nickel plated hammered dulcimer tuning pins $.40 per pin
    The top of the square portion of the pin is approximately 1/8" or 4 mm 

  • 1 1/4" long nickel plated Hitch Pins $.20 per pin

  • For strings go here

T-Handle Tuning Wrench $22 shipping $5

This is my most popular wrench  Fits a tuning pin with a square head measuring 1/8" or 4 mm. 

Gooseneck Tuning Wrench $28 shipping $5

This wrench gives you a bit more leverage. Fits a tuning pin with a square head measuring 1/8" or 4 mm. 

Damper Pull Down Cord 

I use 84 lb test Kevlar line for the string that goes from the damper bar to establish the loop for pull down and the same line in the damper pedal. The cost if you need replacement line is .25 a foot plus $1 shipping

Dusty Strings Damper Springs $80 plus $5 shipping

Four Springs (two per side) and hardware for you do-it-yourselfers who would like to try to make your own dampers. Included besides the four springs are (4) 10/32 X 3/4" Flat Slotted Bolts for attaching a wooden bar to the threaded insert on the spring and (8) 8 X 1/2 Hex Washer Head Screws to attach the springs to your instrument.  

bottom of page